Operation And Adjustment - Pro-Form 520 Zlt Treadmill User Manual

14. Attach the upper end of the Storage Latch (85)
to the Latch Crossbar (91) with a 3/8" x 1 3/4"
Bolt (68) and a 3/8" Nut (10).
Move the treadmill to the desired location for use
if you have not already done so (see HOW TO
FOLD AND MOVE THE TREADMILL on
page 19).
Lower the Frame (38) (see HOW TO LOWER
THE TREADMILL FOR USE on page 19).
15. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is
used to adjust the walking belt (see pages 21 and 22).

OPERATION AND ADJUSTMENT

HOW TO PLUG IN THE POWER CORD
This product must be earthed. If it should malfunc-
tion or break down, earthing provides a path of least
resistance for electric current to reduce the risk of
electric shock. This product's power cord has an
equipment-earthing conductor and an earthing plug.
IMPORTANT: If the power cord is damaged, it must
be replaced with a manufacturer-recommended
power cord.
DANGER:
the equipment-earthing conductor can result
in an increased risk of electric shock. Check
with a qualified electrician or serviceman if
you are in doubt as to whether the product
is properly earthed. Do not modify the plug
provided with the product—if it will not fit
the outlet, have a proper outlet installed by a
qualified electrician.
Improper connection of
GR
14
10
38
UK
Follow the steps below to plug in the power cord.
1. Plug the indicated end of the power cord into the
socket on the treadmill.
Socket on Treadmill
2. Plug the power cord into an appropriate outlet that
is properly installed and earthed in accordance with
all local codes and ordinances.
UK
Outlet
13
91
68
85
AUS
Power Cord
Australia
Outlet
UK
GR
RU
HU