OPERATION
AND ADJUSTMENT
THE PERFORMANT
LUBE
TM
WALKING BELT
Your treadmill features a walking belt coated with
PERFORMANT
LUBE
TM,
a high-performance lubricant.
IMPORTANT:
Never apply silicene spray or other
substances
to the walking belt or the walking plat-
form. Such substances
will detedorate the walking
belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home's power.
Voltage surges, spikes, and noise intederenca can
result from weather conditions or from other appliances
being tumed on or off. To decrease the possibility of
your treadmill
being damaged, always use a surge
suppressor
with your treadmill (see drawing 1 at
the right).
Surge suppressors are sold at most hardware stores
and department stores. Use only a single-outlet surge
suppressor that Is UL 1;_-49listed as a transient voltage
surge suppressor (TVSS). The surge suppressor must
have a UL suppressed voltage rating of 400 volts or
less and a minimum surge dissipation of 450 Joules.
The surge suppressor must be electrically rated for
120 volts AC and 15 amps.
This product must be grounded. If it should malfunc-
tion or break down, grounding provides a path of least
resistance for electdc current to reduce the _isk of elec-
tric shock. This product Is equipped with a cord having
an equipment-grounding conductor and a grounding
plug. Plug the power cord into a surge suppressor,
and plug the surge suppressor into an appropriate
outlet that is properly installed and grounded in
accordance
with all local codes and ordinances.
This product is for use on a nominal 120-volt circuit,
end has a grounding plug that looks like the plug Illus-
trated In drawing 1 below. A temporary adapter that
looks like the adapter illustrated In drawing 2 may be
used to connect the surge suppressor to a 2-pole
receptacle as shown In drawing 2 if a propedy
grounded outlet Is not available.
2
,._----Grounded
Outlet Box
_.l
_SurgeSupp
ressor
ii
Ground,ngP,n
Grounded Outlet
firounding
Plug"_
Groueded Outlet Box
tar
Surge Suppressor
Met ,Screw
The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.
The green-colored dgld ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter Is used it must be held In place
by a metal screw. Some 2-pole receptacle outlet box
covers are not grounded. Contact a qualified elec-
trician to determine if the outlet box cover is
grounded before using an adapter.
7
Need help?
Do you have a question about the 985 CD and is the answer not in the manual?