Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch NBC-265-W
Summary of Contents for Bosch NBC-265-W
- Page 1 HD 720p IP Wireless Camera NBC-265-W Installation and Operation Manual...
-
Page 3: Table Of Contents
I/O connector Audio connectors Resetting the camera Browser connection System requirements Establishing the connection 4.2.1 Password protection in camera Protected network Connection established 4.4.1 Livepage 4.4.2 Recordings 4.4.3 Settings Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... - Page 4 6.4.1 Installer Menu 6.4.2 Picture Settings 6.4.5 Encoder Streams 6.4.6 Audio Recording 6.5.1 Storage Management 6.5.2 Recording Profiles 6.5.3 Retention Time 6.5.4 Recording Scheduler 6.5.5 Recording Status Alarm AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems...
- Page 5 System Log / Event Log 7.1.5 Saving snapshots 7.1.6 Recording video sequences 7.1.7 Running recording program 7.1.8 Audio communication Recordings page 7.2.1 Controlling playback Troubleshooting LED indicators Resolving problems Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08...
- Page 6 | Table of Contents IP Camera 200 Series Customer service Maintenance Repairs 9.1.1 Transfer and disposal Technical Data 10.1 Specifications 10.1.1 Dimensions 10.1.2 Accessories AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems...
-
Page 7: Safety
If not avoided, this could result in minor or moderate bodily injury. CAUTION! Low risk: Indicates a potentially hazardous situation. If not avoided, this could result in property damage or risk of damage to the device. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems... -
Page 8: Important Safety Instructions
10. Attachments, changes or modifications - Only use attachments/accessories specified by the manufacturer. Any change or modification of the equipment, not expressly approved by Bosch, could void the warranty or, in the case of an authorization agreement, authority to operate the equipment. -
Page 9: Fcc & Ices Compliance
Any such modifications could void the user's authority to operate the equipment. If necessary, the user should consult the dealer or an experienced radio/television technician for corrective action. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems... -
Page 10: Ul Certification
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... -
Page 11: Ce Certification
Please dispose of these devices at an environmentally compatible recycling facility, per European Directive 2002/96/EC More information For more information please contact the nearest Bosch Security Systems location or visit www.boschsecurity.com AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual... -
Page 12: Copyrights
Digital Equipment Corporation not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. This software is based in part on the work of the Independent JPEG Group. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... -
Page 13: Introduction
It uses H.264 compression technology to give clear images reducing bandwidth and storage.The camera can be used as a stand-alone video surveillance system with no additional equipment or it can easily integrate with the Bosch DVR 700 Series recorders. Features include: SD/SDHC card slot supports edge recording up to 32 GB –... -
Page 14: Unpacking
Universal power supply with US, EU and UK plug – Camera mount kit – Quick installation guide – CD ROM – Bosch Video Client – Documentation – Tools – Wireless antenna If equipment has been damaged during shipment, repack it in the original packaging and notify the shipping agent or supplier. -
Page 15: Installation
| Installation IP Camera 200 Series Installation Wireless antenna Figure 3.1 Wireless antenna Screw the antenna onto the screw connector on the rear of the camera. Straighten the antenna. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems... -
Page 16: Sd Card
Close and secure the cover. The camera supports most SD/SDHC cards. Note: Use high speed SD cards, class 4 or above (the higher read/ write speed the better). Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... -
Page 17: Mounting The Camera
Use three screws to secure the base of the mounting unit to a wood (Ø3.8 mm, 26 mm deep) or concrete (Ø6 mm, 26 mm deep) surface. On the mounting unit, loosen the ball-socket adjustment ring (2). AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems... - Page 18 Adjust the ball-socket so that camera mount is correcrly aligned for the required angle. Screw camera onto mount and, when in position, tighten the locking ring (1) securely. Tighten the ball-socket adjustment ring (2) securely. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08...
-
Page 19: Network Connector
IP Camera 200 Series Network connector Figure 3.4 Network connection – Connect the camera to a 10/100 Base-T network. – Use a shielded UTP Category 5e cable with RJ45 connectors. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems... -
Page 20: Power Connection
The date/time must be synchronized each time after power on. It is important to ensure that the date/time is correct for recording. An incorrect date/time setting could prevent correct recording. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... -
Page 21: I/O Connector
24 VDC. Max. 1 A continuous, 12 VA. – Trigger in: +9 VDC minimum; +30 VDC maximum. Reverse polarity connection will be inactive. – Alarm input configurable as active low or active high. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems... -
Page 22: Audio Connectors
Line out: 16 Ohm min. 200 mVrms Line - L Line - R Figure 3.7 Audio connectors Connect audio devices to the Line In and Line Out connectors. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... -
Page 23: Resetting The Camera
(7 seconds approximately) until the LED flashes (red) to recall the factory default values. The factory default IP address is 192.168.0.1 Figure 3.8 Reset button AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems... -
Page 24: Browser Connection
A computer with Microsoft Internet Explorer can be used to receive live images from the camera, control cameras, and replay stored sequences. The camera is configured over the network using a browser or via the Bosch Video Client (supplied with the product). System requirements –... -
Page 25: Establishing The Connection
If the connection is not established, the maximum number of possible connections may already have been reached. Depending on the device and network configuration, up to 25 web browsers, or 50 Bosch VMS connections are supported. 4.2.1 Password protection in camera A camera offers the option of limiting access across various authorization levels. -
Page 26: Connection Established
Refer to Section 7.2 Recordings page, page 138 for more information. 4.4.3 Settings Click SETTINGS in the application title bar to configure the camera and the application interface. A new page containing Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... - Page 27 Section 6 Advanced Mode, page 69 for more information on advanced settings. Note: It is recommended that only expert users or system administrators use the Advanced Mode. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems...
-
Page 28: Basic Mode
Note: When entering names do not use any special characters, for example &. Special characters are not supported by the internal recording management system. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems... -
Page 29: Recordings
Define and change a separate password for each level while logged in as service or if the device is not protected by a password. Enter the password (19 characters maximum) for the selected level. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... -
Page 30: Date/Time
Click Sync to PC to apply the system time from your computer to the device. Note: It is important to ensure that the date/time is correct for recording. An incorrect date/time setting could prevent correct recording. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems... -
Page 31: Network
On to activate the automatic acceptance of DHCP-assigned IP addresses. Note: Certain applications (for example, Bosch Video Management System) use the IP address for the unique assignment of the device. If using these applications, the DHCP server must... -
Page 32: Encoder
This page provides general information on the hardware and firmware system, including version numbers. No items can be changed on this page but they can be copied for information purposes when troubleshooting. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems... -
Page 33: Ip Camera 200 Series Table Of Contents | En
Note: When entering names do not use any special characters, for example &. Special characters are not supported by the internal recording management system. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... -
Page 34: General
Assign a camera name to assist in identifying it. The name simplifies the management of multiple devices in more extensive systems, for example the VIDOS or Bosch VMS software. The camera name is used for remote identification, for example, in the event of an alarm. Enter a name that makes it as easy as possible to identify the location unambiguously. - Page 35 The new password is only saved after clicking Set. Therefore, click Set immediately after entering and confirming the password, even if assigning a password at another level. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08...
-
Page 36: Date/Time
Click Generate to fill the table with the preset values from the camera. Select the region or the city which is closest to the system's location from the list box below the table. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems... -
Page 37: Display Stamping
Top, at the Bottom, or at a position of choice using the Custom option, or it can be set to Off for no overlay information. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... - Page 38 Select On for the transmitted video images to be watermarked. After activation, all images are marked with an icon. The icon indicates if the sequence (live or saved) has been manipulated. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems...
-
Page 39: Web Interface
Enter the path for a suitable image for the device logo in this field. The image can be stored on a local computer, a local network, or at an Internet address. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... -
Page 40: Livepage Functions
The system messages are displayed with the date and time in a field next to the video image and provide information about the establishment and termination of connections, etc. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems... -
Page 41: Logging
File for system log Enter the path for saving the system log here. If necessary, click Browse to find a suitable folder. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... -
Page 42: Camera
Fixed exposure: allows a user-defined shutter time. Select the shutter speed when exposure control is set to fixed (1/25, 1/33, 1/50, 1/100 for 50 Hz) or (1/30, 1/40, 1/ 60, 1/120 for 60 Hz). AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems... -
Page 43: Picture Settings
The blue gain adjustment offsets the factory white point alignment (reducing blue introduces more yellow). It is only necessary to change the white point offset for special scene conditions. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... - Page 44 | Advanced Mode IP Camera 200 Series Default Click Default to set all video values to their factory setting. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems...
-
Page 45: Encoder Streams
Set the parmeters for the M-JPEG stream. – Select the Max. frame rate in images per second (IPS). – The Picture quality slider allows adjustment of the M-JPEG image quality from Low to High. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... -
Page 46: Audio
Select G.711 or L16 as the audio Recording format. The default value is G.711. Select L16 if you want better audio quality with higher sampling rates. This requires approximately eight times the G.711 bandwith. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems... -
Page 47: Recording
A Video Recording Manager (VRM) can control all recording when accessing an iSCSI system. The VRM is an external program for configuring recording tasks for video servers. For Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... -
Page 48: Storage Management
| Advanced Mode IP Camera 200 Series further information, contact your local customer service at Bosch Security Systems. 6.5.1 Storage Management Device manager If the VRM option is activated, the VRM Video Recording Manager manages all recording and no further settings can be configured here. - Page 49 Status column by the status Not active. Click Set to activate all media in the Managed storage media list. These are indicated in the Status column by the status Online. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08...
- Page 50 Click a storage medium in the Managed storage media list to select it. Click Remove below the list. The storage medium is deactivated and removed from the list. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems...
-
Page 51: Recording Profiles
– Off: no automatic recording takes place. In the Stream list box, select Stream 1, Stream 2 or I-frames only for standard recordings. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... - Page 52 Video loss alarm) that is to trigger a recording. Select the Virtual alarm sensors that are to trigger a recording, via RCP+ commands or alarm scripts, for example. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems...
-
Page 53: Retention Time
VGA for complete frame rate and high image quality. Enter the required retention time in hours or days for each recording. Recording 1 corresponds to Stream 1; Recording 2 corresponds to Stream 2. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... -
Page 54: Recording Scheduler
Click the date to be deleted. Click OK. The selection is removed from the table and the window is closed. Repeat for any other dates to be deleted. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems... -
Page 55: Recording Status
The graphic indicates the recording activity. An animated graphic is seen when recording is taking place. 6.5.5 Recording Status Details of the recording status are displayed here for information. These settings cannot be changed. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... -
Page 56: Alarm
Only ten passwords can be defined here. Define a general password if more than ten connections are required, for example, when connections are initiated by a controlling system such as VIDOS or Bosch Video Management System. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual... - Page 57 If a particular video output is selected and a split image is set for this output on the receiver, select the decoder from Decoder in the receiver that is to be used to Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08...
- Page 58 Select On to automatically re-established a connection to one of the previously specified IP addresses after each reboot, connection breakdown, or network failure. Audio Select On to transmit the audio stream with an alarm connection. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems...
-
Page 59: Video Content Analyses (Vca)
Select a VCA configuration and make the required settings. If necessary, click the Default button to return all settings to their default values. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... -
Page 60: Vca Configuration- Profiles
No further alarm is triggered during the aggregation time. The post-alarm time set for alarm recordings only starts once the aggregation time has expired. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems... - Page 61 The sensor reacts to variations in the brightness of the video image. The darker the observation area, the higher the value that must be selected. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08...
- Page 62 Detect tampering of cameras and video cables by means of various options. Run a series of tests at different times of the day and night to ensure that the video sensor is operating as intended. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems...
- Page 63 Activate this function if tampering associated with exposure to extreme light (for instance, shining a flashlight directly on the objective) should trigger an alarm. The average brightness of the scene provides a basis for recognition. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08...
- Page 64 If the selected area is too homogenous, so that concealing and moving the structure would not trigger an alarm, then an alarm is triggered immediately to indicate the inadequate reference image. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems...
- Page 65 Right-click any fields to deactivate. Click OK to save the configuration. Click the close button (X) in the window title bar to close the window without saving the changes. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08...
-
Page 66: Vca Configuration - Scheduled
Assign the individual holidays to the VCA profiles, as described above. Deleting Holidays Delete defined holidays at any time: Click Delete. A new window opens. Click the date to delete. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems... - Page 67 IP Camera 200 Series Advanced Mode | en 103 Click OK. The item is deleted from the table and the window closes. The process must be repeated for deleting additional days. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08...
-
Page 68: Vca Configuration - Event Triggered
A delay period may be useful in avoiding false alarms or frequent triggering. During the delay period, the Silent MOTION+ configuration is always enabled. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems... -
Page 69: Audio Alarm
The name makes it easier to search for or identify the alarm in extensive video monitoring systems, for example with the Bosch Video Client and Bosch Video Management System programs. You can also use the name in the Forensic Search program function as a filter option for quick search in recordings. -
Page 70: Alarm E-Mail
Obtain information on operating your cellphone from your cellphone provider. Attach JPEG from camera Check the box to specify that JPEG images are sent from the camera. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems... - Page 71 This makes it easier to identify the origin of the e-mail. Test e-mail Click Send Now to test the e-mail function. An alarm e-mail is immediately created and sent. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08...
-
Page 72: Interfaces
For example, if you want an alarm-activated lamp to stay on after the alarm ends, select Bistable. If you wish an alarm- activated siren to sound for ten seconds, for example, select 10 s. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems... - Page 73 &.) Trigger relay Click the button to switch the relay manually (for example, for testing purposes or to operate a door opener). Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08...
-
Page 74: Network
If a DHCP server is employed in the network for the dynamic assignment of IP addresses, activate acceptance of IP addresses automatically assigned to the device. Certain applications (Bosch Video Management System, Archive Player, Configuration Manager) use the IP address for the unique assignment of the device. If using these applications,... - Page 75 Control Panel of the Windows Control Panel). To limit connections to SSL encryption, set the Off option in the HTTP browser port, the RCP+ port, and Telnet support. This Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08...
- Page 76 IP address of the device. Enable this service here. To do this, obtain an account with DynDNS.org and register the required host name for the device on that site. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems...
- Page 77 To transfer the IP address of the device, click the Register button. Status The status of the DynDNS function is displayed here for information purposes; these settings cannot be changed. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08...
-
Page 78: Advanced
Enter the user name that the Radius server uses for the camera in the Identity field. Enter the Password that the Radius server expects from the camera. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems... -
Page 79: Wlan
Enter the encryption key to get access to the network in the PSK box. Reboot and remove Ethernet cable immediately. Note: To enhance network security, only WPA-PSK (TKIP) and WPA2- PSK (AES) encryption is supported. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... -
Page 80: Multicast
0.0.0.0 the encoder for the stream operates in multi- unicast mode (copying of data stream in device). The camera supports multi-unicast connections for up to five simultaneously-connected receivers. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems... -
Page 81: Ftp Posting
October 1, 2005 at 11.45 and 30 seconds. Posting interval Enter the interval in seconds at which the images are sent to an FTP server. Enter zero for no images to be sent. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... - Page 82 Path on FTP server Enter an exact path to post the images on the FTP server. Max. bit rate Enter a limit for the bit rate in kbps. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems...
-
Page 83: Service
The latest firmware can be obtained from your customer service center or from the Bosch Security Systems download area. To update the firmware: First, store the firmware file on your hard disk. - Page 84 Once all files have been successfully uploaded, the device must be rebooted. In the address field of the browser, enter /reset after the camera's IP address, for example: 192.168.0.10/reset The new SSL certificate is valid. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems...
-
Page 85: System Overview
Keep this information at hand when seeking technical support. Select the text on this page with a mouse and copy it so that it can be pasted into an e-mail if required. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... -
Page 86: Operation Via The Browser
When accessing the camera with a browser, the processor load and network information is available in the upper right of the window next to the Bosch logo. Move the mouse cursor over the icons to display numerical values. This information can help with problem solving or when fine tuning the device. -
Page 87: Image Selection
An automatic reconnection procedure is started in the background to recover from this error. No video recorded Watermarking not valid Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... -
Page 88: Digital I/O
Event Log field. These messages can be saved automatically in a file. To delete the entries from the fields, click the icon in the top right-hand corner of the relevant field. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems... -
Page 89: Saving Snapshots
Click the recording icon again to stop recording. Play back saved video sequences using the Player from Bosch Security Systems. 7.1.7 Running recording program The hard drive icon below the camera images on the Livepage changes during an automatic recording. - Page 90 All connected users receive audio signals sent from the camera but only the user who first pressed the F12 key can send audio signals; others must wait for the first user to release the key. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems...
-
Page 91: Recordings Page
– Change the time interval displayed by clicking the plus or minus icons. The display can span a range from two months to a few seconds. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... - Page 92 Jump to the following bookmark Bookmarks are only valid while in the Recordings page; they are not saved with the sequences. All bookmarks are deleted when leaving the page. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems...
-
Page 93: Troubleshooting
Customer service If a fault cannot be resolved, please contact your supplier or system integrator, or contact Bosch Security Systems Customer Service directly. The Installer should write down all information regarding the unit so that it can be referenced for warranty or repair. The AR18-10-B012 | v1.54 | 2011.08... - Page 94 Service menu. Note down this information and the information found on the camera label before contacting customer service. Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08...
-
Page 95: Repairs
Defective or superfluous devices and parts should be disposed of professionally or taken to your local collection point for hazardous materials. AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems... -
Page 96: Technical Data
Audio Output Line out jack connector Audio Two-way, full duplex communication Audio compression G.711, L16 (live and recording) SD card slot Supports up to 32 GB SD/SDHC card Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... -
Page 97: Dimensions
0 ºC to +40 ºC (+32 ºF to +104 ºF) Temperature (Power supply) Storage -20 ºC to +70 ºC (-4 ºF to +158 ºF) Temperature Humidity 10% to 80% relative humidity (non condensing) AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems... -
Page 98: Accessories
LTC 9348/00 Series Indoor Dome – housings for cameras/lens to 216 mm (8.5 in), ceiling mount, tinted, metal backbox Contact a Bosch representative in your area for the latest available accessories or visit our website at www.boschsecurity.com Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08... - Page 99 146 en | Technical Data IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems...
- Page 101 Bosch Security Systems www.boschsecurity.com © Bosch Security Systems, 2012...