Alarm; Alarm Connections - Bosch NBC-265-W Installation And Operation Manual

92 en | Advanced Mode
6.6

Alarm

Alarm
>
>
>
>
6.6.1

Alarm Connections

Select the response of the camera when an alarm occurs. In the
event of an alarm, the device can automatically connect to a
pre-defined IP address. The device can contact up to ten IP
addresses in the order listed until a connection is established.
Connect on alarm
Select On so that the camera automatically connects to a pre-
defined IP address in the event of an alarm. Select Follows
input 1 so that the device maintains the connection for as long
as an alarm exists.
Number of destination IP address
Specify the numbers of the IP addresses to be contacted in the
event of an alarm. The device contacts the remote locations one
after the other in the numbered sequence until a connection is
made.
Destination IP address
For each number, enter the corresponding IP address for the
desired remote station.
Destination password
If the remote station is password protected, enter the
password here.
Only ten passwords can be defined here. Define a general
password if more than ten connections are required, for
example, when connections are initiated by a controlling
system such as VIDOS or Bosch Video Management System.
AR18-10-B012 | v1.54 | 2011.08
Alarm Connections
VCA
Audio Alarm
Alarm E-Mail
Installation and Operation Manual
IP Camera 200 Series
Bosch Security Systems