IP Camera 200 Series
6.4.3
Encoder Streams
Select H.264 Settings
1.
2.
3.
Note:
The default profiles are optimized for HD wireless cameras,
modifying the profile setting may impact the performance and
quality of both live view and recording.
Preview >>
Previews of streams 1 and 2 can be shown.
1.
2.
3.
Note:
Deactivate the display of the video images if the performance of
the computer is adversely affected by the decoding of the data
stream.
JPEG stream
Set the parmeters for the M-JPEG stream.
–
–
Bosch Security Systems
The codec algorithm for stream 1 is always:
–
H.264 MP 720p25/30 fixed
Select the codec algorithm for stream 2. The following are
available:
–
Copy Stream 1
–
H.264 BP+ bit-rate-limited
–
H.264 MP SD
Select the default profile for each stream from the eight
profiles that have been defined.
Click Preview >> to display a preview of the video for
streams 1 and 2. the current profile is shown above the
preview.
Click 1:1 Live View below a preview to open a viewing
window for that stream. Various additional items of
information are shown across the top of the window.
Click Preview << to close the preview displays.
Select the Max. frame rate in images per second (IPS).
The Picture quality slider allows adjustment of the
M-JPEG image quality from Low to High.
Installation and Operation Manual
Advanced Mode | en
AR18-10-B012 | v1.54 | 2011.08
81