Recordings; En | Table Of Contents Ip Camera 200 Series; Device Access; Camera Name - Bosch NBC-265-W Installation And Operation Manual

IP Camera 200 Series
5.2

Device Access

5.2.1

Camera name

The camera can be assigned a name to assist in identifying it.
The name simplifies the management of multiple devices in
more extensive systems.
The camera name is used for remote identification, for example,
in the event of an alarm. Enter a name that makes it as easy as
possible to identify the location unambiguously.
5.2.2

Password

A password prevents unauthorized access to the device. The
device recognizes three authorization levels: service, user, and
live.
–
–
–
Use the various authorization levels to limit access. Proper
password protection is only guaranteed if all higher
authorization levels are also protected with a password. For
example, if a live password is assigned, a service and a user
password should also be set. When assigning passwords,
always start from the highest authorization level, service, and
use different passwords.
Password
Define and change a separate password for each level while
logged in as service or if the device is not protected by a
password. Enter the password (19 characters maximum) for
the selected level.
Bosch Security Systems
service is the highest authorization level. Entering the
correct password gives access to all the functions of the
camera and allows all configuration settings to be
changed.
user is the middle authorization level. This user can
operate the device, play back recordings, and also control
a camera but cannot change the configuration.
live is the lowest authorization level. It can only be used to
view the live video image and switch between the different
live image displays.
Installation and Operation Manual
Basic Mode | en
AR18-10-B012 | v1.54 | 2011.08
65