Baud Rate; Data Bits; Stop Bits - Bosch VideoJet 8008 Installation And Operating Manual

VideoJet 8008 / VideoJet 8004 | Installation and Operating Manual
Camera ID:
If necessary, enter the ID of the peripheral you wish to control (for example a
dome camera or pan/tilt head).
Note
If you are using a Bosch AutoDome, remember that the value of the Cam-
era ID must always be selected one less than the Bosch camera number
(for example: Bosch camera number: 1, Camera ID: 0).

Baud rate:

Select the value for the transmission rate in bit/s.

Data bits:

The number of data bits per character cannot be changed.

Stop bits:

Select the number of stop bits per character.
Parity check:
Select the type of parity check.
Interface mode:
Select the desired protocol for the serial interface.
Half-duplex mode:
Choose the setting appropriate for your application.
Bosch Security Systems | 2006-07 | V1.5
EN | 61
Configuration using a Web browser