AutoDome Power Supply Boxes
Audio Connections
1.
2.
3.
Figure 3.10 Connections for audio over an Ethernet network
1
2
3
4
5
6
NOTICE!
Refer to the VG5 700 Series AutoDome User Manual for
configuring and using audio over an IP Ethernet network.
Bosch Security Systems, Inc.
Remove the 100 Ω termination resistor from the Biphase
terminals.
Connect the audio line level source to the Biphase C+ input
terminal.
Connect the audio signal ground to the Biphase C- input
terminal.
The following figure illustrates the connections for audio
over an IP network.
C- (Biphase)
C+ (Biphase)
Earth Ground
RxD
TxD
Signal Ground
Installation Guide
Cable and Wire Standards | en
7
AutoDome Data In/Out
8
P105/P106 Connector
9
Audio Out
F.01U.250.895 | 1.0 | 2011.08
37