Table of Contents
Advertisement
AutoDome Power Supply Boxes
3.3
Video and Control Cables
3.3.1
Using Coaxial Cable to Transmit Video and Control
CAUTION!
600 Series AutoDome: If you are using coaxial cable to transmit
video and data between the AutoDome and the head-end, you
must use the coax cable with ferrite included in the AutoDome
packaging. You must connect the incoming coax cable (from the
head-end) to the jack (female end) on the ferrite cable and
^00600
connect the plug end (male connector) of the ferrite cable to
the AutoDome's coax connector.
Coaxial cable terminated with BNC connectors is the most
common method for transmitting composite video. Bilinx
control data can also be sent over the same cable.
Bilinx is a Bosch 2-way communication protocol that allows
remote control, configuration, and updates over a video coax
cable. Bilinx is available on all VG5 100 and 600 Series
AutoDomes.
VG5 Series AutoDomes feature cable compensation or "Pre-
Comp," which extends the range of video from the head end.
Cable
Compensation
Cable Type
RG-59/U
RG-6/U
RG-11/U
Size
Shield
Central Conductor
Terminal Connector BNC
WARNING!
Cable compensation (Pre-Comp) does not extend the range of
Bilinx control. Pre-Comp is not available with VG5 700 Series
AutoDomes.
Bosch Security Systems, Inc.
Maximum Distances
Video Only
Pre-comp OFF
300 m (1000 ft)
450 m (1500 ft)
600 m (2000 ft)
O.D. between 4.6 mm (0.181 in.) and 7.9 mm (0.312 in.)
Copper braid: 95%
Standard copper center
Installation Guide
Cable and Wire Standards | en
Pre-comp ON
600 m (2000 ft)
900 m (3000 ft)
1200 m (4000 ft) 600 m (2000 ft)
F.01U.250.895 | 1.0 | 2011.08
25
Bilinx Control
Pre-comp ON or OFF
300 m (1000 ft)
450 m (1500 ft)
Hide quick links:
Advertisement
Table of Contents
