Table of Contents
Advertisement
Available languages
Available languages
Reversing the Door.
Top cover
Remove screws
Back of wine chiller
Top cover
Disconnect power
connectors
Front of wine chiller
Remove screws and
move to other side
Remove plug button and
move to other side
Top of wine chiller
Remove screws and
top hinge, and move
to other side
Unplug the wine chiller.
Remove the two screws at the back of the top cover.
Lift the back of the cover up about 2" (5 cm) and then slide it
forward slightly, but do not remove.
Tilt the top cover on its side. Locate the power connectors at the
front of the cover. Disconnect each connector by pressing in on
the locking tab on the side of the connector, then pulling out.
Set cover aside.
Carefully lay the wine chiller on its back.
Remove the screws on the top hinge (right side). Remove the hinge.
On the opposite side, remove the screws attaching the top plate to
the cabinet, and install them in the holes left vacant by the top
hinge screws.
Remove the small plug button from the top left side of the door and
install it in the hole on the right side.
Insert the hinge pin from the top hinge into the hole on the top left
side of the door. Attach the top hinge to the cabinet with the screws.
Make sure the door is aligned with the wine chiller cabinet before
tightening the screws.
www.GEAppliances.com
9
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Profile Wine Chiller and is the answer not in the manual?
Questions and answers
wine cooler does not kept right temp
The GE Profile Wine Chiller may not be maintaining the correct temperature due to one of the following reasons:
1. Door Not Closing Properly: Ensure the door is self-closing and fully closed. Check if a bottle or other obstruction is preventing the door from closing completely.
2. Improper Leveling: Verify that the wine chiller is firmly positioned with a 1/8-inch tilt to the back to aid door closure. Adjust the leveling legs by turning them clockwise to raise or counterclockwise to lower the unit.
3. Frequent Door Openings: Minimize door openings, as air carries moisture inside, which can affect the temperature.
If these steps do not resolve the issue, further diagnosis or professional servicing may be required.
This answer is automatically generated