Automatic Humidity Control; Locking The Controls - GE Profile Wine Chiller Owner's Manual

Ge profile wine chiller owner's manual
Hide thumbs Also See for Profile Wine Chiller:
Table of Contents

Advertisement

Available languages

Available languages

About the controls and settings.
6

Locking the Controls

This feature allows you to lock the controls so
the temperature settings cannot be changed. The
interior light will still function.
To lock the controls, press and hold the
RED WINE and INTERIOR LIGHT pads at the
same time for 3 seconds. The word LOC
will appear in the display to indicate the
lockout feature has been activated. The
display will then go back to showing the
actual temperature. Anytime a
temperature pad is pressed while the
lockout feature is activated, LOC will
appear in the display.
Key-Ejecting Lock
The wine chiller can be locked using the
spring-loaded lock located above the door.
Wine Chiller Light
Press the INTERIOR LIGHT pad to turn the
interior light on or off.
If you turn on the light and do not turn
it off, it will automatically turn off after
one hour.

Automatic Humidity Control

The inside of the wine chiller
automatically maintains the necessary
level of humidity to protect wine corks
from drying out. As a result, frost may
form on the inner surfaces. See Care and
Cleaning for instructions on removing
excessive frost buildup.
To unlock the controls, simply press and
hold the RED WINE and INTERIOR LIGHT
pads at the same time for 3 seconds.
As a safety feature, the key for the spring-
loaded lock is automatically ejected and
will not remain in the lock in either the
open or closed position.

Hide quick links:

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Profile Wine Chiller and is the answer not in the manual?

Questions and answers

John V Conti
January 16, 2025

wine cooler does not kept right temp

1 comments:
Mr. Anderson
February 3, 2025

The GE Profile Wine Chiller may not be maintaining the correct temperature due to one of the following reasons:

1. Door Not Closing Properly: Ensure the door is self-closing and fully closed. Check if a bottle or other obstruction is preventing the door from closing completely.

2. Improper Leveling: Verify that the wine chiller is firmly positioned with a 1/8-inch tilt to the back to aid door closure. Adjust the leveling legs by turning them clockwise to raise or counterclockwise to lower the unit.

3. Frequent Door Openings: Minimize door openings, as air carries moisture inside, which can affect the temperature.

If these steps do not resolve the issue, further diagnosis or professional servicing may be required.

This answer is automatically generated

This manual is also suitable for:

Profile pwr04fanbs

Table of Contents

Save PDF