Balanced Bridged Mode (Mono) - ELECTROCOMPANIET AW 120 Owner's Manual

Balanced bridged mode (Mono)

Use an XLR interconnect from the
preamplifiers balanced output left or right to
the power amplifiers right input.
Link from the power amplifiers right XLR
output to the power amplifiers left XLR
input.
This link must turn the phase of + and -.
Connect the speakers + to the amplifiers
right out +. Connect the speakers – to the
amplifiers left out +.
Balanced bridged mode (Mono)
Use the interconnect EC-K5-SPLITT.
Connect the end marked red to the left input
on the amplifier.
Connect the speakers + to the amplifiers
right out +. Connect the speakers – to the
amplifiers left out +.