Advertisement
Quick Links
AW 120
Owner's Manual
WARNING: To reduce risk of fire or electric shock, do not expose this appliance to
rain or moisture. Verify line voltage before use.
Do not remove cover. No user serviceable parts inside. Refer servicing to qualified
service personnel. The warranty in void if the product is tampered with by non
authorised personnel. Use only authorised Electrocompaniet service station.
Advertisement
Related Manuals for ELECTROCOMPANIET AW 120
Summary of Contents for ELECTROCOMPANIET AW 120
- Page 1 Verify line voltage before use. Do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel. The warranty in void if the product is tampered with by non authorised personnel. Use only authorised Electrocompaniet service station.
- Page 2 The rear panel The rear panel of the Ampliwire AW 120 DMB is equipped with both and XLR input (female) and output(male), for link options. (Biamping, multiroom etc.) AW 120 also features speakon connectors in addition to ordinary speaker terminals.
- Page 3 Balanced XLR operation Use an interconnect with gnd on pin 1, + on pin 2 and – on pin 3 Single ended operation Use an RCA to XLR adapter (ECP5XLR). Connect ECP5XLR to the XLR input. Connect the RCA interconnect to the input on the ECP5XLR...
- Page 4 Balanced bridged mode (Mono) Use an XLR interconnect from the preamplifiers balanced output left or right to the power amplifiers right input. Link from the power amplifiers right XLR output to the power amplifiers left XLR input. This link must turn the phase of + and -. Connect the speakers + to the amplifiers right out +.
- Page 5 Technical Specifications AW120: The following technical data were measured on randomised test objects and are typical data. Amplifier section Main voltage 120 V / 240 V. Clipping point of the amplifier is set to a level where total harmonic distortion (THD) is 0.2 %. <...
- Page 6 Always ship the amplifier in its original carton and packaging material to prevent damage in transit. Electrocompaniet will not accept responsibility for any damage caused in transit, how ever caused. If you require further information concerning the amplifier operation, or if you have any questions related to service, please do not hesitate to contact your dealer or your national Electrocompaniet distributor.