Advertisement
Quick Links
AW-100 DUAL MONO
BALANCED POWER AMPLIFIER
Owner's Manual
To reduce risk of fire or electric shock, do not expose this appliance to
WARNING:
rain or moisture. Verify line voltage before use.
Do not remove cover. No user serviceable parts inside. Refer servicing to
qualified service personnel. The warranty in void if the product is tampered with
by non authorised personnel. Use only authorised Electrocompaniet service
station.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for ELECTROCOMPANIET AW-100
Summary of Contents for ELECTROCOMPANIET AW-100
- Page 1 Verify line voltage before use. Do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel. The warranty in void if the product is tampered with by non authorised personnel. Use only authorised Electrocompaniet service station.
- Page 2 Welcome to the world of Electrocompaniet We sincerely thank you for selecting an amplifier from Electrocompaniet. We hope you will enjoy years of listening pleasure and true high end musical performance from your audio system. Kindly read this owners manual to familiarise yourself with the set before operation.
- Page 3 The design features of Ampliwire 100 DMB After the Electrocompaniet 25 watt amplifier had established a new standard for transistor amplifiers, research was undertaken to find ways to make the amplifier even better, and to extend its highly musical sound quality to more powerful amplifier designs.
- Page 4 The carton and packaging have been designed to offer the safest possible protection when transporting your amplifier. The content of the carton is as follows: 1 pcs Electrocompaniet Ampliwire 100 DMB 1 pcs AC power cord 1 Owners Manual 1 pcs Spare fuse, 5.0 AT slow-blow 5x20mm (120V AC)
- Page 5 Single-ended (normal) input and operation Upon arrival, the amplifier is set for single-ended use with a shorting plug in the ne- gative RCA input. This will short the negative (-) input of the amplifier to ground. With shorting plugs in position, the amplifier is ready to be connected in a normal way with a single ended preamplifier.
- Page 6 Warning: The amplifier will be warm. Due to the high class A operating point used in the Electrocompaniet design, it is normal that the amplifier feels warm. Proper ventilation will be needed, and the amplifier should not be covered in. A good rule is to allow 1 - 2 inches of air sidewise, and 2 - 3 inches above the amplifier.
- Page 7 Always ship the amplifier in its original carton and packaging material to prevent damage in transit. Electrocompaniet will not accept responsibility for any damage caused in transit, no matter however caused. If you require further information concerning the amplifier operation, or if you have any questions related to service, please do not hesitate to contact your dealer or national Electrocompaniet distributor.
- Page 8 Technical Specifications AW100DMB : The following technical data were measured on randomised test objects and are typical data. All measurements are made with the following equipment: Distortion analyser: Tektronix AA501 Oscilloscope: Tektronix 468 Oscillator: Tektronix SG505 Frequency counter: Rascal 9838 Phase meter: Hewlett Packard 3575A Amplifier section...
Need help?
Do you have a question about the AW-100 and is the answer not in the manual?
Questions and answers