Problems With The Wan Interface - Billion BiPAC 7300 RA User Manual

Problems with the WAN Interface

Problem
Initialization of the
PVC connection
("linesync") failed.
Frequent loss
ADSL linesync
(disconnections).
Corrective Action
Ensure that the telephone cable is connected properly from
the ADSL port to the wall jack. The ADSL LED on the front
panel of the router should be on. Check that your VPI, VCI,
encapsulation type and type of multiplexing settings are the
same as those provided by your ISP. Reboot the router. If
you still have problems, you may need to verify these
settings with your ISP.
of Ensure that all other devices connected to the same
telephone line as your router (e.g. telephones, fax machines,
analogue modems) have a line filter connected between
them and the wall socket (unless you are using a Central
Splitter or Central Filter installed by a qualified and licensed
electrician), and ensure that all line filters are correctly
installed and the right way around. Missing line filters or line
filters installed the wrong way around can cause problems
with your ADSL connection, including causing frequent
disconnections. If you have a back-to-base alarm system
you should contact your security provider for a technician to
make any necessary changes.
108