Billion BiPAC 7300 RA User Manual page 107

to view and modify the data.
Trap Community: Specify a name to be identified as the Trap Community, and an IP
address. This community string will be checked against the string entered in the
configuration file. Once the string name is matched, users from this IP address will be sent
SNMP Traps.
SNMP V3:
Specify a name and password for authentication. And define the access right from identified
IP address. Once the authentication has succeeded, users from this IP address will be able
to view and modify the data.
SNMP Version: SNMPV2c and SNMPv3
SNMPv2c is the combination of the enhanced protocol features of SNMPv2 without the
SNMPv2 security. The "c" comes from the fact that SNMPv2c uses the SNMPv1 community
string paradigm for "security", but is widely accepted as the SNMPv2 standard.
SNMPv3 is a strong authentication mechanism, authorization with fine granularity for
remote monitoring.
Traps supported: Cold Start, Authentication Failure.
The following MIBs are supported:
From RFC 1213 (MIB-II):
System group
Interfaces group
Address Translation group
IP group
ICMP group
TCP group
UDP group
EGP (not applicable)
Transmission
SNMP group
From RFC1650 (EtherLike-MIB):
dot3Stats
From RFC 1493 (Bridge MIB):
dot1dBase group
102