Using The Remote Control - Goodmans GSPK30IP User Manual

02 Get going
1

Using the remote control

The Remote Control can be used to operate the Portable System. Before using the Remote
Control, the Safety Tab should be removed.
Simply pull out the Safety Tab from the remote control, as shown below.
To use the Remote Control, simply direct it towards the front of the Portable System and
press the desired buttons.
DON'T FORGET! When replacing the battery make sure that you use the same size
and type.
2
Connecting your iPod to the unit
1. Adjust the height of the iPod connection pin by aligning the iPod adjustment dial with
your iPod icon.
For iPod mini,
nano G1,
nano G2,
nano G3
or nano G4
users:
2. Place your iPod into the dock and connect to the iPod connection pins.
For iPod mini, nano G1, nano G2, nano G3 or nano G4 users, select the appropriate iPod
adaptor (supplied) for your iPod and place it into the dock so that it slides under the
iPod connection pins.
6
Nano G1, G4 Nano G2
iPod adaptor iPod adaptor
For iPod Mini and
Nano G3 iPod adaptor