Table of Contents
Advertisement
D
I
ESKTOP
NSTALLATION
O
1
PTION
1.
Feed one end each of the wall adapter
and telephone cords through the
opening on the back of the base plate.
2.
Connect the wall adapter cord to the DC
9V jack.
3.
Connect the cord from the telephone to
the corresponding jack.
4.
Connect the cord for the wall outlet to
the corresponding jack.
5.
Attach the base plate as shown below.
6.
Plug the wall adapter into an AC wall
outlet.
5
O
2
PTION
1.
Connect the wall adapter and telephone
cords as described above (Steps 2-4).
2.
Attach the base plate as shown above
(Figure 5).
3.
Match the correct cord with its groove
and press it in.
4.
Plug the wall adapter into an AC power
outlet.
8
Slip the base plate tabs into the
grooves provided at the bottom of
the unit. Lay the base plate flat
against the unit and push up until
you hear it click into place. To
remove the base plate, press where
it says "PUSH," slide the base plate
down and off.
1
2
3
4
3
6
4
Advertisement
Table of Contents
