Strong SRT 5005 Instruction Manual page 13

How to Connect
C. Component Connection
for YPbPr
You can connect to your TV with the supplied RCA
component cable to give you video. For audio connect
with the supplied RCA audio cables, this will give you
MPEG-2 stereo for audio.
If you require Dolby Digital Audio Output (through
you're Dolby Digital Decoder Amplifier) please refer to
Note: DOLBY DIGITAL AUDIO.
Video Mode of your TV
Having made the above connections to suit your
requirements: The next step is to make certain you
have selected a Video Mode on your Television from
your TV Remote Control
Your Receiver is now ready to be operational
D. Connecting the Antenna
Connect TV Antenna to Connector 3 (Aerial)
Connector 3 Aerial IEC 169-2 female Input from
Antenna to Receiver
Video Mode of your TV
Having made the above connections to suit your
requirements: The next step is to make certain you
have selected a Video Mode on your Television from
your TV Remote Control
Your Receiver is now ready to be operational
13