Strong SRT 5005 Instruction Manual page 14

Digital terrestrial television receiver

Hide thumbs Also See for SRT 5005:

Table of Contents

Power On & Auto Scan

• With the power pack of the unit connected to the

Mains Power and to connector 10 of the unit switch

on the Mains Power and RED standby light will be

viewed on the Display, including 4 horizontal lines.

• Push the RED Power Button on the remote control

and a Welcome Banner will appear listing 4 topics.

• On the remote control, push the Green button for

Scan All Channels.

• Scan All Channels banner will appear

prompting Yes / NO

• Using R & L Scroll buttons, select YES, which will

then be highlighted

• Push OK button on the Remote Control and Unit will

now begin to scan and lock in all available

frequencies in your area.

This will take approximately one minute.

Table of Contents