Radio Operation; Switching The Tuner Mode; Listening To Radio; Manual Storing Of Station Presets - Alpine INA-N333R Owner's Manual

Radio Operation

TUNE/A.ME
SOURCE/
POWER BAND/TEL. OK
F/SETUP Preset buttons (1 through 6)

Switching the Tuner Mode

The INA-N333R incorporates the MAX TUNE Pro for the
highest quality tuner audio. Moreover, you can choose
between two settings to suit your own personal sound
preferences usage.
1
Press and hold the F/SETUP button for at least 2
seconds. The display changes to the SETUP screen.
2
Move the Flipper switch up or down to select FM
CONDITION. Press the OK button or MODE knob to
set.
3
Move the Flipper switch up or down to select your
preference. Press the OK button or MODE knob to set.
The display returns to the SETUP screen.
HI-FI: Sound quality priority setting
NORMAL: Standard setting
STABLE: Noiseless priority setting
NOTES
• The initial setting at the factory is "NORMAL."
• If you find the sound is very noisy while listening to the tuner
in the HI-FI mode, we recommend you change to the
NORMAL mode.
4
When the setting is completed, press the F/SETUP
button to return to the normal mode.
MODE Flipper switch

Listening to Radio

1
Press the SOURCE/POWER button until a radio
frequency appears in the display.
2
Press the BAND/TEL. button repeatedly until the
desired radio band is displayed.
FM-1 FM-2 FM-3
3
Press the TUNE/A.ME button to select the tuning mode.
DX SEEK (Distance mode) → SEEK (Local mode) →
OFF (Manual mode) → DX SEEK
NOTE
The initial mode is DX SEEK.
Distance mode:
Both strong and weak stations will be automatically
tuned in (Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in
(Automatic Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual
tuning).
4
Press the or button to tune in the desired
station.
Holding down the or
frequency continuously.
NOTES
• The STEREO indicator appears on the display when a Stereo
FM station is tuned in.
• About TMC Broadcast Indicator
The TMC indicator, which is displayed in the audio mode, is
displayed when a TMC reception station is included in the
selected broadcast station. The TMC information cannot be
obtained.
The TMC indicator, which is displayed in the navigation mode
(when optional NVD-T003 is used), is displayed when the
conditions for obtaining the TMC information have been
satisfied.
The optional navigation disc (NVD-T003) is required in order
to obtain the TMC information.
Please see the instruction manual of the navigation disc for
details.

Manual Storing of Station Presets

1
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2
Press and hold the Preset button (1 through 6) that
you want to store the station on for at least 2 seconds.
The selected station is stored.
3
Repeat the procedure to store up to 5 other stations
onto the same band.
To use this procedure for other bands, simply select
the band desired and repeat the procedure.
A total of 30 stations can be stored in the preset
memory (6 stations for each band; FM-1, FM-2, FM-3,
MW and LW).
NOTE
If you store a station in a preset memory which already has a
station, the current station will be cleared and replaced with the
new station.
MW LW FM-1
button will change the
7
-EN