Other Functions; Displaying The Title/Text - Alpine INA-N333R Owner's Manual

Other Functions

OK
TITLE

Displaying the Title/Text

It is possible to display the CD/Station title if the title has
been previously inputted. For details, see "Titling Discs/
Stations" (page 15). Text information, such as the disc
name and the track name, will be displayed if playing a
CD text compatible disc. If a MP3 compatible CD changer
is connected, it is also possible to display the folder
name, the file name, and the ID3 tag, etc. while playing
MP3 files.
1
Press the TITLE button.
The mode will change every time the button is pressed.
About "Title" and "Text"
Title: With this device, it is possible to input the CD name
(see page 15). This inputted name is referred to as
a "title."
Text: Text compatible CDs contain text information such
as the disc name and track name. Such text
information is referred to as "text."
Radio mode:
PS (Programme Service Name)
Station Name (TITLE DISPLAY)
RADIO TEXT DISPLAY
CD/Changer mode:
TEXT DISPLAY (TRACK/DISC NAME)
TITLE DISPLAY
14
-EN
MODE Flipper switch
*
4
*
1
*
4
MP3 mode (When MP3 compatible changer is
connected):
ID3 TAG DISPLAY
FOLDER/FRAME
FILE/FRAME
TITLE DISPLAY
∗1
Displayed during playback of a disc with CD Text.
Nothing will be displayed when the CD contains no
text data.
∗2
If an MP3 file contains ID3 tag information, all the
ID3 tag information is displayed (e.g., track name,
artist name, and album name).
All other tag data is ignored.
∗3
The recording sampling rate and bit rate of the MP3
file are displayed.
∗4
Nothing will be displayed when the title has not
been inputted.
NOTES
• Some characters may not be displayed correctly with this
device, depending on the character type.
• The display may not show all the information of the CD Text
depending on the CD changer.
• When the Scroll Setting (refer to page 19) is set to "OFF",
press and hold the TITLE button for at least 2 seconds to
scroll the Text information only once (TEXT DISPLAY,
FOLDER NAME DISPLAY, FILE NAME DISPLAY or TAG
DISPLAY mode.)
• "NO SUPPORT" is displayed when the desired text
information cannot be displayed on this unit.
*
2
*
3
DISPLAY
*
3
DISPLAY
*
4