Message Alert Tone; Message Recording Time - VTech CS6648-2 User Manual

Answering system settings

Message alert tone

When the message alert tone is set to on, and there is at least one new message, the
telephone base beeps every 10 seconds.
There is no audible alert at the handset.
Press MENU when the phone is not in use.
1.
to scroll to Answering sys, then press SELECT.
2. Press or
to scroll to Ans sys setup, then press SELECT.
3. Press or
4. Press or to scroll to Msg alert tone, then press SELECT.
to select Tone: On or Tone: Off.
5. Press or
Press SELECT to save and you hear a confirmation tone.
6.
The answering system must be turned on for message alert tone
to beep.

Message recording time

You can set the recording time allowed for each incoming message. The message
length is three minutes by default.
Press MENU when the phone is not in use.
1.
to scroll to Answering sys, then press SELECT.
2. Press or
to scroll to Ans sys setup, then press SELECT.
3. Press or
4. Press or to scroll to Recording time, then press SELECT.
to select 3 minutes, 2 minutes or 1 minute.
5. Press or
Press SELECT to save and you hear a confirmation tone.
6.
The message alert tone is preset to off.
50
Msg alert tone
ECO
Tone: Off
ECO
Recording time
ECO
3 minutes
ECO