Screen Messages - VTech CS6648-2 User Manual

Appendix

Screen messages

Ans sys off
Ans sys on
Base is calling
Call log empty
Calling base
Calling HS X
Check AC power
Contact deleted
Directory empty
Directory full
Ended
Failed
HS X is calling
Incoming call
Intercom
Intercom ended
Intercom to
Line in use
Low battery
Microphone on
Muted
New voicemail
The answering system is turned off and will not
answer calls.
The answering system is turned on and will answer calls.
The telephone base is calling the handset.
There are no caller ID log entries.
The handset is calling the base (for intercom calls).
The handset is transferring an outside call to the base.
The handset/telephone base is calling another handset (for
intercom calls).
The handset/telephone base is transferring an outside call
to another handset.
The corded handset is in use while the telephone base is in
line power mode.
A directory entry is deleted.
There are no directory entries.
The directory is full. You cannot save any new entries
unless you delete some current entries.
You have just ended a call.
The handset registration is not successful.
Another system handset is calling (for intercom calls).
There is a call coming in.
The system device is on an intercom call.
The intercom call has just ended.
You have started the intercom process, and need to enter
the device number you wish to call.
An extension phone, or one of the handsets is in use.
The handset battery needs to be recharged.
The mute function is turned off and the other party can
hear you.
The microphone is off. The other party cannot hear you but
you can hear them.
There are new voicemail messages from your telephone
service provider.
59