Lvds Connector; Inverter Power Connector; Universal Serial Bus (Usb) - Supero SuperServer 5015A-PHF User Manual

LVDS Connector

An LVDS connector (J5) is available
on the X7SPA-L only. This connector
provides 18-bit LVDS (Low Voltage
Differential Signaling) for an LCD
panel or other similar devices. Refer
to the table on the right for pin defi ni-
tions.

Inverter Power Connector

The inverter connector on J6 is a 7-pin
connector and is used in conjunction
with the LVDS connector. Connect the
backlight module of the LCD panel to
this socket. This controls the back-
light lamp, PWM control signals, and
inverter power..

Universal Serial Bus (USB)

Four Universal Serial Bus ports
(USB1/2/3/4) are located on the I/O
backpanel. Additionally, one Type
A USB port (USB10) and fi ve USB
headers (USB5/6, 7/8, 9) are pro-
vided on the motherboard to provide
front chassis access (cables are not
included). See the tables on the right
for pin defi nitions.
Chapter 5: Advanced Motherboard Setup
LVDS
Pin Defi nitions
Pin# Defi nition
1 3.3V
2 LDATAP0
3 GND
4 LDATAP1
5 GND
6 LDATAP2
7 GND
8 NC
9 LVDDEN
10 LCLKP
Inverter Power
Pin Defi nitions
Pin # Defi nition
1 12V
2 12V
3 GND
4 GND
5 3.3V
Back Panel USB Ports,
Type A USB Port Pin Defi nitions
Pin# Defi nition Pin#
1 +5V
2 USB_PN
3 USB_PP
4 Ground
Front Panel USB Header
Pin Defi nitions
Pin # Defi nition
1 +5V
2 USB_PN
3 USB_PP
4 Ground
5 NA
5-15
Pin Defi nition
11 3.3V
12 LDATAN0
13 GND
14 LDATAN1
15 GND
16 LDATAN2
17 GND
18 NC
19 NC
20 LCLKN
Pin # Defi nition
6 3.3V
7 GND
8 GND
9 BKLTEN
10 BKLTCTL
Defi nition
5 +5V
6 USB_PN
7 USB_PP
8 Ground
Pin # Defi nition
6 +5V
7 USB_PN
8 USB_PP
9 Ground
10 Key