Assembly - ProForm 130 Elliptical User Manual

ASSEMBLY

To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480.
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the
included tools, assembly requires a Phillips screwdriver
and a rubber mallet
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parenthe-
ses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The
second number is the quantity needed for assembly. Note: Some small parts may have been preassembled.
If a part is not in the parts bag, check to see if it has been preassembled.
M8 Split
Star Washer
(112)–8 Washer (90)–3
M4 x 14mm
Screw (104)–8
Hub Screw (87)–8
M8 x 69mm Button
Bolt (80)–1
.
Wave Washer
(111)–2
M4 x 16mm
Round Head
Screw (101)–8
M8 x 23mm Shoulder
Screw (115)–4
M10 x 127mm Button Screw (83)–2
, an adjustable wrench
M8 Washer M8 Jamnut
(88)–6
M4 x 32mm
Round Head
Screw (105)–6
M8 x 23mm Button
Screw (84)–4
M10 x 80mm Carriage
Bolt (82)–2
5
M10 Nylon
(79)–5 Locknut (81)–2
M4 x 45mm
Screw (108)–2
M8 x 41mm Button
Bolt (78)–4
,