Troubleshooting - Uploading Results - Fluke 750SW User Manual

DPCTrack2
Users Manual

26.3 Troubleshooting - Uploading Results

Possible uploading problems:
26-4
Shop for Fluke products online at:
If the Tag used for a result stored on the calibrator is not found in the Instrument
or Loop screens, the user will be prompted to save the result to a file. To avoid
this, create an Instrument or Loop record with an ID matching the Tag entered on
the Calibrator before uploading.
Remember that after Authorizing a calibration during Upload, the user may
review and update the Calibration record in the Calibration Screen if there are
additional values to view, edit, or remove from the record.
MyFlukeStore
www.
1.877.766.5412
.com