Table of Contents
Advertisement
Logged Data- This button opens the Logged Data
screen. This screen is used to upload and manage
Logged Data from the Fluke device to DPCTrack2.
Logged data is recorded and examined non-calibration
data.
Note
See Chapter 24 of the User Manual for more
information about the Logged Data screen.
Shop for Fluke products online at:
Uploading and Downloading
The Upload/Download screen facilitates communication
between the application's database and the Fluke
Calibrator. The Software can manage all instrument
calibration needs. Connect a Fluke Calibrator to a
computer and easily transfer downloaded tasks and
upload calibration results and logged data to a computer
workstation.
If DPCTrack2 is unable to communicate with your 743b,
744, 753, or 754 Calibrator, check to make sure that the
USB/RS232 Serial Port is connected to the designated
port.
MyFlukeStore
www.
.com
Calibration Management Software
Uploading and Downloading
1.877.766.5412
9
Advertisement
Table of Contents
