Uploading Logged Data; Selecting Port - Fluke 750SW User Manual

DPCTrack2
Users Manual

24.2 Uploading Logged Data

To upload Logged Data from the Fluke calibrator to the DPCTrack2 database, first plug
the calibrator into the appropriate port on your workstation, turn the calibrator on, and
select the Upload Logged Data button at the top of the screen.

24.2.1 Selecting Port

Select the appropriate port in the Ports section, and click Calibrator Info below to verify
the application is recognizing the calibrator correctly. Figure 24.2 shows the calibrator
info. If there are no ports present or incorrect calibrator information is displayed, select
the Refresh button to refresh the Ports.
24-4
Shop for Fluke products online at:
Figure 24.2
MyFlukeStore
www.
1.877.766.5412
.com