Loop Master (Spec/Test Point; Loop Worksheet (Spec Summary; Loop Worksheet (Specs/Test Point; Loops Due Report - Fluke 750SW User Manual

Loop Master (Spec/Test Point)

This is also a report that shows all of the master information for a Loop, however it is
more detailed in that the stated accuracy, accuracy percentage and resolution information
are displayed for each test point individually.

Loop Worksheet (Spec Summary)

This report looks similar to the Loop Calibration Report (Spec Summary) except for the
fact that it has blank lines on which to write the "As-Found" and "As-Left" values for the
Loop's calibration. It also has an area in which to document the Test Instrument(s) used,
comments and whether the Loop passed or failed. You can print out worksheets for all
Loops due for calibration within a specified period of time and give them to your
technician to complete on the job.

Loop Worksheet (Specs/Test Point)

This report is similar to the other Loop worksheet except for the fact that it lists the stated
accuracy, accuracy percentage and resolution for each individual test point, as opposed to
summarizing this information at the top of the report.

Loops Due Report

This report lists all of the Loops that will be due for calibration within a specified date
range.

Test Instrument Group

Test Instrument Bar Code Label

This Bar Code Label contains the actual Bar Code, Item ID, Description and the Last
Calibration Date and its Next Due Date. They may also be scanned back into the program
making the entry of data, creation of records and/or the taking of a physical inventory
faster and easier. Dimensions for this label are 2" X 2".

Test Instrument Master (Spec Summary)

This is a report that shows all of the master information for a Test Instrument, with the
stated accuracy, accuracy percentage and resolution information for the calibration test
points summarized at the top of the report.

Test Instrument Master (Specs/Test Point)

This is also a report that shows all of the master information for a Test Instrument,
however it is more detailed in that the stated accuracy, accuracy percentage and
resolution information are displayed for each test point individually.

Test Instrument Reverse Traceability

This report shows all Instruments, Test Instruments and Loops that were calibrated by a
particular Test Instrument during a specified period of time.

Test Instrument Worksheet (Spec Summary)

This report looks similar to the Test Instrument Report (spec summary) except for the
fact that it has blank lines on which to write the "As-Found" and "As-Left" values for the
Test Instrument's calibration. It also has an area in which to document the Test
Instrument(s) used, comments and whether the Test Instrument passed or failed. You can
print out worksheets for all Test Instruments due for calibration within specified period of
time and give them to your technician to complete on the job.

Test Instrument Worksheet (Specs/Test Point)

This report is similar to the other Test Instrument worksheet except for the fact that it lists
the stated accuracy, accuracy percentage and resolution for each individual test point, as
opposed to summarizing this information at the top of the report. It has an area to record
Shop for Fluke products online at:
MyFlukeStore
www.
Report Descriptions Listed by Groups
Test Instrument Group
1.877.766.5412
.com
A
A-5