Power-Up Options - Fluke ProcessMeter 789 User Manual

789
Users Manual
Option
Change current span 0 % setting
Disable beeper
Disable auto power-off
Display test/show firmware version
28
Table 11. Power-Up Options
Pushbutton Default
R
Remembers
last setting
G
Enabled
J
Enabled
(Blue)
H
Disabled
Action Taken
Toggles between 0 - 20 mA and 4 - 20 mA
range
Disables beeper
Disables the feature that turns off the meter
power after 30 minutes of inactivity. Auto
power off is disabled regardless of this
option if MIN MAX recording is on.
Display HOLD (as long as button is
pushed), then shows firmware version.