Netvanta 6310 Rear Panel Design; Figure 2. Netvanta 6310 Rear Panel Layout - ADTRAN 6310 Installation Manual

NetVanta 6310/6330 Series Hardware Installation Guide

NetVanta 6310 Rear Panel Design

The NetVanta 6310 rear panel is shown below.
SHDSL EFM ANNEX B
SLOT 1
NetVanta 6310 Rear Panel Interfaces
NIM2/VIM2 Option Slots
The two NIM2/VIM2 option slots (labeled
option modules (refer to
PRI Interface
The PRI interface (labeled
43 for the PRI interface pinouts.
10/100Base-T Ethernet Interfaces
The Ethernet ports (
ETH 0/1
Ethernet interface pinouts. The Ethernet ports provide the following:
• 10Base-T or 100Base-T with a single connector
• Auto negotiation
• CSMA/CD
• IEEE 802.3 compatibility
CONSOLE Interface
The interface is an EIA-232 serial port (DCE), which provides for local management and
CONSOLE
configuration (via a DB-9 female connector). See
pinouts.
Connection directly to an external modem requires a cross-over cable.
Power Connection
The rear panel has a power input to the AC universal power supply. Please refer to
the Unit on page 40
61700100G1-34F
SLOT 2

Figure 2. NetVanta 6310 Rear Panel Layout

SLOT 1
Option Modules on page
) provides a single PRA/PRI/E1/T1 interface. See
PRI 0/1
and ) are RJ-45 connectors. See
ETH 0/2
for connection details.
Copyright © 2013 ADTRAN, Inc.
PRI 0/1
and ) accept a variety of NIM2/VIM2
SLOT 2
23).
Table A-2 on page 43
Table A-1 on page 43
for the
Physical Description
ETH 0/1 100-240 VAC
50/60 Hz
ETH 0/2
Table A-3 on page
for the
interface
CONSOLE
Supplying Power to
17