Rear Panel
The SR820ac (shown above) rear panel contains the following cabling port and connectors:
Item
TEL 1
1
TEL 2
2
Ethernet
3
RESET
USB
4
CABLE
5
POWER
6
Description
Phone connection for a single telephone.
Use any Ethernet port to connect an Ethernet‐equipped computer, hub, bridge,
or switch using an RJ‐45 cable.
Press and hold the RESET button for five seconds or longer to restore SR820ac to
factory default settings. After factory default settings are restored, the gateway
will restart and may take 5 to 30 minutes to find and lock on the appropriate
communication channels.
USB host port for USB storage devices like flash drives or hard drives.
Connect the SR820ac to a cable wall outlet.
Switch gear for power on/off the SR820ac.
11