Adding And Removing A Pc Card - Gateway M520 User Manual

To remove a memory card:
1
If you are removing a CompactFlash card or IBM Microdrive, release
the eject button by pressing the eject button once, then eject the
card by pressing the eject button again.
-OR-
If you are removing a MemoryStick, MemoryStick Pro, SecureDigital,
or MultiMediaCard, push the memory card into the notebook. The
memory card pops out slightly.
Important
2
Pull the memory card out of the notebook.
3
Insert the protector into the memory card slot.

Adding and removing a PC Card

Your notebook has a PC Card slot (also known as a PCMCIA card slot).
This slot accepts one Type II card.
You do not need to restart your notebook when changing most cards
because your notebook supports hot-swapping. Hot-swapping means that
you can insert a PC Card while your notebook is running. If your PC Card
does not work after hot-swapping, see the PC Card manufacturer's
documentation for further information.
Do not use the remove hardware
taskbar to remove the memory card.
www.gateway.com
icon in the
47