Replacing The Hard Drive Kit - Gateway M520 User Manual

Replacing the hard drive kit

If you would like more hard drive capacity, you can replace your original
drive with a higher-capacity drive.
To replace the hard drive kit:
1
Back up any data you want to transfer to the new hard drive. For
more information, see "Backing up files" in Using Your Computer
which has been included on your hard drive. To access this guide,
click
Start
2
Follow the instructions under
discharge" on page
3
Turn off your notebook, disconnect the AC adapter and modem and
network cables.
4
Turn your notebook over so the bottom is facing up.
5
Remove the battery.
6
Remove the hard drive kit screw. For the location of the hard drive
bay, see
7
Slide the old hard drive kit out of your notebook.
70
, , then click
All Programs
66.
"Bottom" on page
www.gateway.com
Gateway Documentation
"Preventing static electricity
15.
.