Navigation Panel - ZyXEL Communications P-870H Series User Manual

As illustrated above, the main screen is divided into these parts:
• A - title bar
• B - navigation panel
• C - main window
• D - status bar

3.2.1 Navigation Panel

Use the menu items on the navigation panel to open screens to configure ZyXEL
Device features. The following tables describe each menu item.
Table 2 Navigation Panel Summary
LINK TAB
Status
Network
WAN Layer 2
Interface
Internet
Connection
LAN IP
Wireless LAN General
More AP
WPS
WPS Station
WDS
Advanced
Setup
NAT Port
Forwarding
Address
Mapping
Trigger Port
DMZ Host
ALG
P-870H/HW Series User's Guide
FUNCTION
This screen shows the ZyXEL Device's general device and network
status information. Use this screen to access the statistics and
client list.
Use this screen to add or remove a DSL PTM (Packet Transfer
Mode) interface.
Use this screen to configure ISP parameters, WAN IP address
assignment, and other advanced properties.
Use this screen to configure LAN TCP/IP, DHCP and IP alias
settings.
Use this screen to configure the wireless LAN settings, WLAN
authentication/security settings and MAC filtering rules.
Use this screen to configure multiple BSSs on the ZyXEL Device.
Use this screen to enable WPS (Wi-Fi Protected Setup) and view
the WPS status.
Use this screen to use WPS to set up your wireless network.
Use this screen to set up Wireless Distribution System links to
other access points.
Use this screen to configure the advanced wireless LAN settings.
Use this screen to make your local servers visible to the outside
world.
Use this screen to configure network address translation mapping
rules.
Use this screen to change your ZyXEL Device's port triggering
settings.
Use this screen to configure a default server which receives
packets from ports that are not specified in the Port Forwarding
screen.
Use this screen to allow SIP sessions to pass through the ZyXEL
Device.
Chapter 3 Introducing the Web Configurator
39