Policy Forwarding Setup - ZyXEL Communications P-870H Series User Manual

Chapter 13 Policy Forwarding
The following table describes the labels in this screen.
Table 59 Advanced > Policy Forwarding
LABEL
Policy Name
SourceIP
Protocol
SourcePort
SourceMAC
Interface
Remove
Add

13.2.1 Policy Forwarding Setup

Click the Add button in the Policy Forwarding screen. Use this screen to
configure the required information for a policy route.
Figure 90 Policy Forwarding: Add
The following table describes the labels in this screen.
Table 60 Policy Forwarding: Add
LABEL
Policy Name
Source IP
Address
Protocol
Source Port
Use Interface
Back
162
DESCRIPTION
This is the name of the rule.
This is the source IP address.
This is the IP protocol.
This is the source port number.
This is the source MAC address.
This is the WAN interface through which the traffic is routed.
Click the icon to remove a rule from the ZyXEL Device. A window displays
asking you to confirm that you want to delete the rule.
Click this to create a new rule.
DESCRIPTION
Enter a descriptive name of up to 16 printable English keyboard
characters, including spaces.
Enter the source IP address.
Select the IP protocol (TCP or UDP).
Enter the source port number.
Select a WAN interface through which the traffic is sent. You must have
the WAN interface(s) already configured in the WAN screens.
Click Back to return to the previous screen without saving.
P-870H/HW Series User's Guide