System Settings; The Time Setting Screen - ZyXEL Communications P-870H Series User Manual

Chapter 21 System Settings
The following table describes the labels in this screen.
Table 83 Maintenance > System > Genera
LABEL
UserName
Old Password
New Password
Retype to
Confirm
Apply
Cancel

21.3 The Time Setting Screen

To change your ZyXEL Device's time and date, click Maintenance > System >
Time Setting. The screen appears as shown. Use this screen to configure the
ZyXEL Device's time based on your local time zone.
Figure 128 Maintenance > System > Time Setting
216
DESCRIPTION
Type the user name you use to access the system.
Type the default password or the existing password you use to access the
system in this field.
Type your new system password (up to 30 characters). Note that as you
type a password, the screen displays a (*) for each character you type.
After you change the password, use the new password to access the
ZyXEL Device.
Type the new password again for confirmation.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
P-870H/HW Series User's Guide