Adjustmentguides - Genie PowerMax1200 Operation & Maintenance Manual

Maintenance and Adjustments
ADJUSTMENTGUIDES
LED indicator colors: (_ OFF 0 Blue 0 Purple @ Red
Doorclosingforce is FACTORY set and requiresno adjustment
for normaloperation.
• NEVER adjustthe force settings to compensate for damage,
includingan unbalanced door,bindingdoor track, or broken
spring.
• Performmonthlya CONTACT REVERSE TEST. S eepage 8.
ForceSettings
Forcesettingsare pre programmedat the factory and "learned"
duringthe Open/Close Limit settings steps(seepages 6-7), Fornormal
use,these settingsshould not needadjustmentwith this unit.
However, c onditionspossiblyrequiringadjustmentare:
1. Doorswith very stiff weather seals.
2. Doorsthat start down, STOP, and reversebeforeclosing.
3. Doorsthat start up, but STOPbeforethey completelyopen.
ForceAdjustment
It Pressand h°ld _(_
bothup and
down buttons - +
2 secondsor until round
LEDturns RED.
[] Presseither
untilyou reach
desiredsetting.
[] Pressand
release.
PR6GRAM
L_ Presseither _
untilyou
reachthe -- ÷
desiredsetting.
[] Pressand _o_
release.
SEf
BLUE
OFF OFF Flashes3 Times
The CurrentUP FORCE SETTING
will display.SEECHART IN NEXT
COLUMN.
USECHART IN NEXT COLUMN
LOCKS IN SETTING.
Thenthe New ©
OFF
DOWNFORCE BLUE
SETTING will display. Flashing
USECHART IN ©
NEXT COLUMN BLUE
BLUE
LOCKS IN SETTING.
Both LEDs turn
_ E/_ 0
BLUE then OFF BLU OFF
BLUE / OFF
confirmsboth
FORCE Settingsare reset.
FORCE SETTINGS DONE
18
(continuednext page)