Genie PowerMax1200 Operation & Maintenance Manual page 11

Required Programming
Pressand releasethe same button on the remote
(bothLED'sflash blue and thenturn off).
The Remotebuttonis now programmed.
Repeatas necessaryfor additionalRemotes.
Toprogramthe same Remotefor other garagedoor openers, r epeat
the stepsaboveusingone of the othertwo Remotebuttons.
EachRemotecan be programmed for three door openers.
BASICPROGRAMMING I S COMPLETE A NDYOUR GARAGE DOOR IS
READY TOUSE!
NOTE:ForCar2U and HomeLink, p ark the car outside thegarage
with the ignitionkey in the "Accessory" position, Follow the Car2Uor
HomeLinkinstructionto set the button in the car to Geniemode,
IMPORTANT: YourHomeLink®devicewill
ONLY respondto pressingTHISbutton
on your Intellicoderemotewhen it's searching
to connectto your remote in "LearnMode" as
describedin the HomeLink®instruction manual.
W Pressand releasethe same buttonon the remote
|_fl
(thedoor shouldopenor close).
11