Administration – System, Continued...
By selecting the Modify button, you will be able to change the switch's IP Configuration, Client ID, IP
Address, Subnet Mask, Gateway, Name, Contact information, and the Location of the switch through the
web management features, depending on the IP Configuration. It is recommended to change the TCP/IP
information through the Command Line Interface (CLI) initially, but it defaults to the following:
IP Configuration
IP Address
Subnet Mask
Gateway
(Revised 2012-05-01)
– Static
– 192.168.1.201
– 255.255.255.0
– 192.168.1.1
Page 36 of 196