Table of Contents
Advertisement
5. Any one 709FX can only participate in one N-Ring.
6. N-Ring copper ports must be run at 100Mb full duplex, including the default 'autonegotiate' as
long as all switches in the ring support 100Mb full duplex.
N-Ring – Configuration, Continued...
The "N-Ring Mode" is one of three, as below:
If N-Ring Mode is "Manager", then a pull-down allows selection of available ports TX1/TX2, or TX7/TX8
(on 709FX) as N-Ring ports.
(Revised 2012-05-01)
Page 107 of 196
Advertisement
Table of Contents
