Table of Contents
Advertisement
MACAddress and SwitchName use current switch values.
<MACAddress/>
<SwitchName/>
<OtherText>myClientID</OtherText>
<OtherHex>0102de03ad00be09ef</OtherHex>
</ClientID>
</IPConfiguration>
<!-- ______________________________________________________________________________________
<!-- User management
<!-- A list of logon accounts (5 maximum) to add to the switch.
<Users
mode="keep or delete">
<!-- mode=delete - delete existing accounts before adding accounts (default)
<!-- mode=keep - do not delete existing accounts before adding accounts
<!--
All User elements (name, password, access) are required.
<User>
<Name>Joe</Name>
<Password>xxx</Password>
<Access>admin OR
</User>
</Users>
<!-- ______________________________________________________________________________________
<!-- Port configuration
<!-- You may uses this block to define port VLAN identifiers (PVIDs)
<Ports>
<ValidatePorts>yes OR
<!-- Use PortNumber or PortName
<Port>
<PortNumber>4</PortNumber>
<PVID>1</PVID>
</Port>
<Port>
<PortName>TX6</PortName>
<PVID>26</PVID>
</Port>
</Ports>
<!-- ______________________________________________________________________________________
<!-- DHCP server
<DHCPServer
mode="keep or delete">
<!-- mode=delete - delete existing profiles before adding profiles (default)
<!-- mode=keep - do not delete existing profiles before adding profiles
<Enabled>yes OR
<!-- If the server is enabled (enabled=yes), you can add DHCP server profiles.
(If not enabled, can not add profiles.)
<Profile>
<!-- Required: Name, LowIP, HighIP, LeaseDays. LeaseHours is optional, and
defaults to 0.
<Name>prof1</Name>
<LowIP>192.168.2.1</LowIP>
<HighIP>192.168.2.254</HighIP>
(Revised 2012-05-01)
-->
<!-- mode must be "keep" or "delete"
user</Access>
-->
no</ValidatePorts>
-->
no</Enabled>
-->
<!-- 255 character limit
<!-- 255*2 character limit
<!-- 3-15 character limit
<!-- 3-15 character limit
<!-- Access must be admin or user
<!-- optional
or no. If no, invalid ports are ignored.
-->
<!-- PortNumber ranges from 1 to the maximum port
number for the switch
<!-- PVID ranges from 1 to 4094
<!-- Name of port on switch
<!-- PVID ranges from 1 to 4094
<!-- mode must be "keep" or "delete"
<!-- Enabled must be yes or no
-->
<!-- required
-->
<!-- required
-->
<!-- required
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
-->
<!-- Must be yes(default)
-->
-->
-->
-->
-->
-->
-->
<!-- 19 character limit
Page 194 of 196
-->
-->
-->
-->
-->
-->
-->
-->
Advertisement
Table of Contents
