Autodial; Dtmf N Umbers - Kenwood TK-2170 Instruction Manual

A
UTODIAL
You can store 16 names (up to 8 characters per name) and
DTMF numbers (up to 16 digits per number) in memory.
■
S DTMF N
TORING
1 Press the key programmed as Autodial Programming.
• If programmed by your dealer, you can also press and
hold the # key for 1 second.
• The first entry in the Autodial list appears.
2 Press the <B and C> keys, rotate the selector, or enter
an appropriate number using the DTMF keypad
(01 ~ 16) to select your desired Autodial list number.
• Press and hold the Side 1 key to toggle the display
between the list number and the entry name.
3 Press the S or
4 Enter the desired list name using the DTMF keypad.
• If enabled by your dealer, you can use the selector to
select a digit. Press the C> key to confirm the digit.
Repeat until the complete name is entered.
• Press the A or # key to delete an incorrect character.
Press and hold the A or # key to delete all characters.
5 Press the S key to confirm the entry.
• "
6 Enter the desired number using the DTMF keypad.
• If enabled by your dealer, you can use the selector to
select a digit. Press the C> key to confirm the digit.
Repeat until the complete number is entered.
• Press the A or # key to delete an incorrect character.
Press and hold the A or # key to delete all characters.
7 Press the S key to confirm the entry.
• "
• "
8 Press the S or
• Press the A or # key to cancel.
UMBERS
key to confirm the list number.
" appears after confirming the entered name.
" appears after confirming the entered number.
" appears if you are overwriting an entry.
key to store the name and number.
29