Programmable Functions - Kenwood TK-2170 Instruction Manual

PROGRAMMABLE FUNCTIONS

The Auxiliary, Side 1, Side 2, S, A, <B, and C> keys {pages 11
and 12} can be programmed with the functions below. Please
contact your dealer for further details on these functions.
Note:
◆ The selector can be programmed as either CH/GID Up/Down or
Zone Up/Down.
◆ Your dealer can also enable the selector to be used when making
setting adjustments (as an optional method for using the <B and
C> keys).
• Autodial
• Autodial Programming
• AUX
• Call 1 ~ 2
• CH/GID Down
• CH/GID Up
• Channel Entry
• Digit 1x Down
1
• Digit 1x Up
• Digit 10x Down
• Digit 10x Up
• Direct CH/GID 1 ~ 4
• Display Character
• Emergency
• Home CH/GID
• Key Lock
• Lamp
• Lone Worker
• Low Transmit Power
1
"Digit 1x Down", "Digit 1x Up", "Digit 10x Down", and "Digit 10x Up" can
be programmed only when the 5-tone function has been enabled.
2
"Emergency" can be programmed only on the Auxiliary (orange) key.
3
"Trunking Group Code Select" is available only when the Trunking
board has been installed.
14
1
1
1
2
• Monitor
• Monitor Momentary
• None
• OST
• Scan
• Scan Delete/Add
• Scrambler
• Selcall
• Selcall + Status
• Squelch Level
• Squelch Off
• Squelch Off Momentary
• Status
• Talk Around
• Transceiver Password
• Trunking Group Code Select
• VOX
• Zone Down
• Zone Up
3