MANUAL DIALING
■ Method 1
Press and hold the PTT switch, then enter the desired digits
using the keypad to send the DTMF code.
■ Method 2
If your dealer has activated the [Keypad Auto PTT]
function, you need not press the PTT switch while pressing
the keys on the keypad. The DTMF code will be sent
automatically when you press a key.
AUTODIAL
If the Store & Send function is disabled, Autodial allows you to
quickly call DTMF numbers that have been programmed onto
your transceiver.
1 Press the key programmed as [Autodial].
•
The last called number appears.
2 Press the <B or C> key to select your desired Autodial list
number.
3 Press the PTT switch to make the call.
•
Press the S key to exit without making a call.
■ Store & Send
If the Store & Send function has been enabled by your
dealer, you can configure whether or not each DTMF digit
sequentially appears on the transceiver display each time
you press a key (0 ~ 9,
1 Press the key programmed as [Autodial].
•
"CODE" appears.
2 Press the 0 to 9,
•
A tone will sound and the number will appear on the
display.
DTMF CALLS
or #).
or # key.
15