Dtmf Calls; Autodial; Stun; Dtmf Number Display - Kenwood TK-2312 Instruction Manual

AUToDIAl

Autodial allows you to quickly call DTMF numbers that have
been programmed onto your transceiver.
1 Press the key programmed as [Autodial].
• The last called number appears.
2 Press <B or C> to select your desired Autodial list number.
3 Press the PTT switch to make the call.
• Press S to exit without making a call.

STUN

This function is used when a transceiver is stolen or lost.
When the transceiver receives a call containing a stun code,
the transceiver becomes disabled. The stun code is cancelled
when the transceiver receives a call with a revive code.
• "STUN" appears while the transceiver is stunned.

DTMF NUMBEr DISPlAy

Note: This features can only be activated when DTMF Signaling is
turned OFF.
When you receive a DTMF code containing at least 3 digits, it
will appear on the display. Each successive digit will continue
to scroll across the display, as long as each digit is received
within  second of the previous digit. If no digit is received for
more than  second, then when a new digit is received, the
display will clear and begin with the new digit.
Press any key to cancel the DTMF number display.

DTMF CAllS

5