Dtmf (Dual Tone Multi Frequency) Calls; Manual Dialing; Store And Send - Kenwood TK-2170 Instruction Manual

DTMF (DUAL TONE MULTI FREQUENCY) CALLS

M D
ANUAL IALING
Method 1: Press and hold the PTT switch, then enter the
desired digits using the front panel keypad.
• If your dealer has activated the Keypad Auto PTT function, you
need not press the PTT switch while pressing the keys on the
keypad. The DTMF code will be sent automatically when you
press a key.
Method 2: Enter the desired digits using the front panel
keypad (maximum of 16 digits). After entering the complete
number, press the PTT switch.
• The DTMF code is transmitted after pressing the PTT switch.
Note: If you switch the power OFF before sending the number, the
number will be cleared from memory.
S S
TORE AND END
Store and send allows you to make DTMF calls without the
need for a DTMF keypad.
1 Press the key programmed as Autodial.
• " " appears.
2 Rotate the selector to select a digit.
• Alternatively, you can enter digits using the DTMF keypad.
3 Press the C> key to accept the entered digit and move to
the next digit.
• Press the A key to delete an incorrect character. Press and
hold the A key to delete all entered characters.
4 Repeat steps 2 and 3 to enter the entire number.
• You can enter up to 16 digits.
5 Press the PTT switch to make the call or the Side 2 key to
page the selected recipient.
28