Table of Contents
Advertisement
Note:
◆ For keypad operation, you must use an optional microphone with a keypad.
MANUAL DIALING
1 Press and hold the PTT switch.
2 Enter the desired digits using the keypad.
•
If Keypad Auto-PTT is enabled by your dealer, you do not need to press
the PTT switch to transmit; you can make the call simply by pressing the
keys.
AUTODIAL
Autodial allows you to quickly call DTMF numbers that have been programmed
onto your transceiver.
1 Press the key programmed as [Autodial].
•
"Ad" appears on the display.
2 Press the
/
number directly (1 ~ 9)
•
"A1" (Autodial list 1) appears on the display.
3 Press the PTT switch to make the call.
REDIALING
1 Press the key programmed as [Autodial].
•
"Ad" appears on the display.
2 Press the 0 key.
•
"rd" appears on the display.
•
If there is no data in the redial memory, an error tone will sound.
3 Press the PTT switch to make the call.
Note:
◆ Switching the transceiver power OFF clears the redial memory.
DTMF CALLS
key to select your desired Autodial list number, or enter the list
19
Advertisement
Table of Contents
