Projecting A Waypoint; Editing A Waypoint - Garmin Rino 130 Owner's Manual

Projecting a Waypoint

Projecting a waypoint from any map item (another waypoint, etc.) allows you to establish a
new waypoint on a bearing and distance projected from that map item.
To project a waypoint:
1. Select a map item from the Find 'N Go Menu.
2. Highlight the Option Menu on-screen button
press the
THUMB STICK
IN.
3. Highlight either the bearing or distance field, then press the
the numerical keyboard. Enter the new bearing or distance, then highlight 'OK' and press
IN to finish.

Editing a Waypoint

A waypoint or contact can be edited to add notes or change the map symbol, name, coordi-
nates, or elevation. It can also be deleted.
To edit a waypoint:
1. Use the Find 'N Go Menu to display the waypoint/contact or highlight it on the Map Page
and press the THUMB STICK
2. To make changes to the waypoint map symbol, name, location coordinates, elevation
fields and notes, highlight the desired field and press the
the keyboard. (For Notes, highlight 'Edit' and press IN to start entering data, up to 30
characters.) Select 'OK' and press the
3. Highlight the 'OK' button the press the
at the top of the Information Page and
IN to display the options. Highlight 'Project Waypoint' and press
IN.
THUMB STICK IN to finish.
to save the changes.
THUMB STICK
IN to display
THUMB STICK
THUMB STICK IN to display
Features
Waypoints
Project Waypoint Page
Editing a waypoint note
47